Granular packaging machine is suitable for filling those powder granular materials with good fluidity, granule packaging machine suitable for medicine, food, chemical, starch grain and other aspects of small bag packaging, suitable for the production of granular drugs, sugar, coffee, fruit jane, tea, monosodium glutamate, salt, seeds, desiccant, Granule Packing Machine such as the production of fine particulate matter manufacturers.
Use of granular packaging machine:
Granule packaging machine is mainly used for the following particles of good fluidity: washing powder, seeds, salt, fodder, monosodium glutamate, dry seasoning, sugar, etc., fast, high precision, Granule Packing Machine the use of adjustable cup metering, using printed with photoelectric marking of packaging materials can obtain a complete trademark pattern.
Repair and maintenance of granule packing machine
The maintenance of granular packaging machine is essential for long time use. Mechanical lubrication
1, Granular packaging machine box part of the oil table, Granule Packing Machine before driving should be all refueling once, midway can be in accordance with the temperature rise of the bearings and the operation of the situation added.
2, the Worm gear box must be long-term storage oil, the oil surface height of the worm gear all intrusion into the oil, if used regularly, every March to change the new oil, going at the bottom of the oil plug, can be put oil.
3, in the pellet packaging machine refueling, do not make oil spill cup outside, do not flow to the particle packaging machine around and on the ground. Granule Packing Machine Because the oil is easy to make material pollution, affect product quality.
1, regularly check the parts, monthly, check the worm gear, worm, lubrication block bolts, bearings and other activities of the rotation of the flexible and wear conditions, Granule Packing Machine found that defects should be repaired in time, not reluctantly used.
2, particle packaging machine should be placed in the dry and clean indoor use, not in the atmosphere containing acids and other corrosive gases in the body of the use of the site.
3, particle packaging machine after use or stop, Granule Packing Machine should take out the rotary drum to clean and brush the remaining powder in the bucket, and then installed, for the next use to do a good job of preparation.
4, when the drum in the work before and after the movement, Granule Packing Machine to adjust the M10 screws to the appropriate position. If the gear shaft is channeling, the back of the M10 screws to the appropriate position, adjust the clearance to the bearing does not occur, hand-turn belt pulley, elastic appropriate, Granule Packing Machine too tight or too loose can cause damage to the machine.
5, if the stop time is longer, must be the pellet packaging machine wipe the whole body clean, the smooth surface of the parts anti-rust oil, with a cloth hood good.